Danner pump choice for large pond and waterfall up to 11 feet high.

Description of the Danner 2400 pump ... made in USA. Suitable for large garden fountains, large piped statuary and ponds and operates submerged or in-line ...

Energy efficient - pays for itself in savings. Safe for fresh, saltwater or pond use. Only one moving part means there aren't any seals to wear out. All models shown below are fully submersible and also suitable for in line use. Approved for indoor or outdoor use. These powerful pumps feature a ceramic, magnetic impeller and are ideal for large aquarium applications as well as water gardens, ponds and statuary.

The directional flow output can be used in any orientation and the pump includes a sponge pre filter for submersible operation  This energy efficient pump has a 18ft. power cord and includes a foam pre-filter to prevent pump from clogging with debris. 20' shut-off. It will probably suit your requirements if you want to pump up to a maximum of 1200 gallons per hour at low running cost and low purchase price 24 hours per day ... OK if you have a medium  to large waterfall up to about 10 feet high or a pond up to 5000 gallons if no waterfall.  Great range of pumps for small to medium sized ponds and waterfalls

Flow is in US galls/hr

Why you need a Pump to move water around your pond and filter ... Your pond fish need to breathe. Submersible pond water pumps are essential to provide oxygen for garden fish ponds & bio filters. Why does my garden fish pond need a water pump anyway? The water pumped around the garden fish pond circuit supplies fish and pond filter bacteria with life-giving oxygen. If the water pump stops for any length of time (certainly more than 4 hours) the bacteria within your fish pond's biofilter which are there to purify the pond water die. The result is the pond filter stops working and undesirable levels of ammonia and nitrites build up in the pond water. These impurities become highly toxic to pond fish and especially koi at even low concentrations.

The Pond Professor's Pump Review

To decide if a pump is right for you you need to know

• Height (or head) to pump to

• Volume in gallons per hour you want to pump around

• Cost of the pump to buy

• Cost of the pump to run based upon 24hrs per day running

• Guarantee period avoid 1 yr guarantee pumps for ANY pond

This chart helps you understand and how to choose a suitable pump

• Electricity cost is shown in US cents per Kwhr (kilowatt-hour) but can be used for any decimal currency

• If watts not known then multiply AMPS x VOLTS to work it out

• If your pump uses more than watts shown then use combination of above
  For example if pump uses 150 watts then add values for 50 and 100 watts from above table

• On the matter of cost do take note of the operating cost .... normally far more important than the original cost and if you ever compare pumps ALWAYS
  take this electricity cost into account.

• The company is E G Danner ... 50 years in manufacturing.

• Their powerful low energy consumption pond and waterfall pumps are specially made to do the job reliably day in and day out and are GUARANTEED for 3 years. Also by shopping at the right place yo get a much better price than the retail price normally offered.